Attendance: Penelope, Tucker, Nick, Kevin
Agenda:
- Rebuild the Feild
- Maintain the robot
- Continue designing the manipulator
- Program with Robot C
Penelope-helped re-set up the field, then put tape down where it was missing.
Nick wrote his first robot C program and is planning to learn more in the future. :D
Tucker tightened the touch sensors, reinforced one of the motor controllers, switched the drive motor channels, and re-mounted the switch.
Kevin: I helped with the changes to the robot and the setup of the field. Later I worked on the FRC bunny-bot. I found that the original bucket would work with almost no modification.
No comments:
Post a Comment